Всем привет.
Ситуация такая.
У меня Appliance Server, к нему надо присобачить ACT14 полку с двумя платами.INT-IP2 и EMTL.
Как я понял по литературе, intip у меня должен быть в коуплер моде,тоесть может стоять где угодно кроме 1 слота, и должен работать как INTIPA.Подключился к плате,дал ей адрес и тфтп указал.
На самом AS создал шкаф,платы.Но чет ниче не помогает.все идет вроде хорошо а потом пишет...
0000000A-0000066C: FAST_BOOT : We use IP parameters comming from BOOT :
0000000B-0000066C: FAST_BOOT : CPU address : 172.31.160.3
0000000C-0000066C: FAST_BOOT : Redundant CPU address : None
0000000D-0000066C: FAST_BOOT : CPU1 physical address : 172.31.160.2
0000000E-0000066C: FAST_BOOT : CPU2 physical address : 172.31.160.1
0000000F-0000066C: FAST_BOOT : PCS physical address : None
00000010-0000066C: ConfigIP : Start Ethernet Link ...
00000011-0000066C: EthMon : New ethernet abilities set [ 10MBps 100MBps Half ]
00000012-0000066C: EthMon : Autonegociation mode will be used
00000013-0000066C: EthMon : Lauch Ethernet Phyter
00000014-0000066C: EthMon : Ethernet Phyter ready
00000015-0000066C: EthMon : Start Auto-Negotiation ...
00000016-000007FD: EthMon : Auto-Negotiation process complete (BMCR=0x1000, PHYSTS=0x0E21) (True Auto-Negotiation)
00000017-000007FD: EthMon : Speed set to 100MBps (Auto-sense)
00000018-000007FD: EthMon : Duplex set to Half (Auto-neg)
00000019-000007FD: EthMon : Wait for Link Up ...
0000001A-000007FD: EthMon : Link Up
0000001B-000007FD: ConfigIP : Startup of Ethernet Link succeed
0000001C-000007FD: ConfigIP : using static IP Parameters
0000001D-000007FD: ConfigIP : IP Address : 172. 31.160. 12
0000001E-000007FD: ConfigIP : IP Subnet Mask : 255.255.255. 0
0000001F-000007FD: ConfigIP : IP Default Router : 0. 0. 0. 0
ping fd = 2
00000020-000007FD: ioctl SIOCADDRT returned errno 22
00000021-000007FF: ConfigIP : No Default Router provided !
00000022-000007FF: L.C.G. seed (0x39c60)
00000023-000007FF: MngtC1cpu : Wait for C1 clock....
00000024-000007FF: INTIP-B : C1 clock present
00000025-000007FF: INTIP-B : Wait for first cpl board ad req...
00000026-00000EE6: req detection is stopped
00000027-00000EE6: First Board Ad Req from C1...
00000028-00000EE6: My coupleur position is 6 in crystal 3 .
00000029-00000EE6: INTIP-B : First cpl board ad req OK
0000002A-00000EE6: STARTINTIP : Ask CS 172. 31.160. 3 to download the startintip
0000002B-00000EE7: BoardAdResp send to cpl 0 .
0000002C-0000187A: ConfigIP : Ethernet check success.
0000002D-00002279: STARTINTIP : DOWNLOAD OK from 172. 31.160. 3
0000002E-00002279: STARTINTIP : Downloaded file size = 35 bytes
0000002F-00002279: STARTINTIP : parse line 'set udp=32512' [Skipped]
00000030-00002279: STARTINTIP : parse line 'set voip_port=32512'
00000031-00002279: STARTINTIP : VOIP base port set to 32512 (0x7F00)
00000032-00002279: BatchMonitor : Start Executing Batch id 00000001
00000033-00002279: STARTINTIP : voip_port tag present, switch to relocatable port management rules
00000034-00002279: FSK : Switch UDP port range to [32512(0x7F00)..33024(0x8100)]
00000035-00002279: FastPing : Changed the port to use for fast ping from 32641 to 32641
00000036-00002279: CallControl::init()
00000037-0000227B: IP_SIG_PM-PortManager : Created [21000..21999] Family TCP
00000038-0000227C: H245_IC_PM-PortManager : Created [25000..25999] Family TCP
00000039-0000227C: Reset of Released Call Counters
0000003A-0000227C: SI_handler : Creation successfull of SI2 handler
0000003B-0000227F: QMC : Started on MCC 2
0000003C-0000227F: QMC : 30 channel on TDM A
0000003D-0000227F: QMC : 00 channel on TDM B
0000003E-0000227F: QMC : 00 channel on TDM C
0000003F-0000227F: QMC : 30 channel on TDM D
00000040-0000227F: INTIP-B : Waiting IP Link Establishement...
INTIP fails to start
Event : Signalization link establishment failed
Diagnosis :
- INTIP board failed to establish signalization link
Checklist :
- Check that there is at least one signalization board available (INTIPA In Service)
- Check that the signalization board can reach the INTIP board
Ситуация такая.
У меня Appliance Server, к нему надо присобачить ACT14 полку с двумя платами.INT-IP2 и EMTL.
Как я понял по литературе, intip у меня должен быть в коуплер моде,тоесть может стоять где угодно кроме 1 слота, и должен работать как INTIPA.Подключился к плате,дал ей адрес и тфтп указал.
На самом AS создал шкаф,платы.Но чет ниче не помогает.все идет вроде хорошо а потом пишет...
0000000A-0000066C: FAST_BOOT : We use IP parameters comming from BOOT :
0000000B-0000066C: FAST_BOOT : CPU address : 172.31.160.3
0000000C-0000066C: FAST_BOOT : Redundant CPU address : None
0000000D-0000066C: FAST_BOOT : CPU1 physical address : 172.31.160.2
0000000E-0000066C: FAST_BOOT : CPU2 physical address : 172.31.160.1
0000000F-0000066C: FAST_BOOT : PCS physical address : None
00000010-0000066C: ConfigIP : Start Ethernet Link ...
00000011-0000066C: EthMon : New ethernet abilities set [ 10MBps 100MBps Half ]
00000012-0000066C: EthMon : Autonegociation mode will be used
00000013-0000066C: EthMon : Lauch Ethernet Phyter
00000014-0000066C: EthMon : Ethernet Phyter ready
00000015-0000066C: EthMon : Start Auto-Negotiation ...
00000016-000007FD: EthMon : Auto-Negotiation process complete (BMCR=0x1000, PHYSTS=0x0E21) (True Auto-Negotiation)
00000017-000007FD: EthMon : Speed set to 100MBps (Auto-sense)
00000018-000007FD: EthMon : Duplex set to Half (Auto-neg)
00000019-000007FD: EthMon : Wait for Link Up ...
0000001A-000007FD: EthMon : Link Up
0000001B-000007FD: ConfigIP : Startup of Ethernet Link succeed
0000001C-000007FD: ConfigIP : using static IP Parameters
0000001D-000007FD: ConfigIP : IP Address : 172. 31.160. 12
0000001E-000007FD: ConfigIP : IP Subnet Mask : 255.255.255. 0
0000001F-000007FD: ConfigIP : IP Default Router : 0. 0. 0. 0
ping fd = 2
00000020-000007FD: ioctl SIOCADDRT returned errno 22
00000021-000007FF: ConfigIP : No Default Router provided !
00000022-000007FF: L.C.G. seed (0x39c60)
00000023-000007FF: MngtC1cpu : Wait for C1 clock....
00000024-000007FF: INTIP-B : C1 clock present
00000025-000007FF: INTIP-B : Wait for first cpl board ad req...
00000026-00000EE6: req detection is stopped
00000027-00000EE6: First Board Ad Req from C1...
00000028-00000EE6: My coupleur position is 6 in crystal 3 .
00000029-00000EE6: INTIP-B : First cpl board ad req OK
0000002A-00000EE6: STARTINTIP : Ask CS 172. 31.160. 3 to download the startintip
0000002B-00000EE7: BoardAdResp send to cpl 0 .
0000002C-0000187A: ConfigIP : Ethernet check success.
0000002D-00002279: STARTINTIP : DOWNLOAD OK from 172. 31.160. 3
0000002E-00002279: STARTINTIP : Downloaded file size = 35 bytes
0000002F-00002279: STARTINTIP : parse line 'set udp=32512' [Skipped]
00000030-00002279: STARTINTIP : parse line 'set voip_port=32512'
00000031-00002279: STARTINTIP : VOIP base port set to 32512 (0x7F00)
00000032-00002279: BatchMonitor : Start Executing Batch id 00000001
00000033-00002279: STARTINTIP : voip_port tag present, switch to relocatable port management rules
00000034-00002279: FSK : Switch UDP port range to [32512(0x7F00)..33024(0x8100)]
00000035-00002279: FastPing : Changed the port to use for fast ping from 32641 to 32641
00000036-00002279: CallControl::init()
00000037-0000227B: IP_SIG_PM-PortManager : Created [21000..21999] Family TCP
00000038-0000227C: H245_IC_PM-PortManager : Created [25000..25999] Family TCP
00000039-0000227C: Reset of Released Call Counters
0000003A-0000227C: SI_handler : Creation successfull of SI2 handler
0000003B-0000227F: QMC : Started on MCC 2
0000003C-0000227F: QMC : 30 channel on TDM A
0000003D-0000227F: QMC : 00 channel on TDM B
0000003E-0000227F: QMC : 00 channel on TDM C
0000003F-0000227F: QMC : 30 channel on TDM D
00000040-0000227F: INTIP-B : Waiting IP Link Establishement...
INTIP fails to start
Event : Signalization link establishment failed
Diagnosis :
- INTIP board failed to establish signalization link
Checklist :
- Check that there is at least one signalization board available (INTIPA In Service)
- Check that the signalization board can reach the INTIP board